FREE SESSIONS
|
Introduction to the Basics of UV/EB Curing Dr. Mike J. Idacavage, Colorado Photopolymer Solutions
|
TECHNICAL CONFERENCE TRACK A
|
TECHNICAL CONFERENCE TRACK B
|
3D Printing 8 AM - 10 AM
New Oligomers for 3D Printing Inks Ahmet Nebioglu, Dymax Oligomers & Coatings
UV Additive Manufacturing of Polymer Derived Ceramics Zak Eckel, HRL Labs, LLC
Toughening Resins for 3D Printing William Wolf, Sartomer
Acrylated Silicones Suitable for SLA 3D Printing Bob Ruckle, Siltech Corp
|
Formulation 8 AM - 10 AM
Evaluation of Adhesion Using Different Formulations, Substrates, and Curing Protocols Neil Cramer, CPS
Adhesion Promoting Oligomers Matt Terwillegar, Myriant Corporation
Combining Oxiranes and Oxetanes to Enhance Kinetics and Improve Physical Properties Sara Kaalberg, University of Iowa
|
Specialty Applications 10 AM - NOON
UV Curable Sioxane Based Resins for 100 nm Pitch by R2R Nanoimprinting Changjin Lee, Korea Research Institute of Chemical Technology
Predicting Biofilm Resistance of UV-Curable Coatings via the Lifshitz-van der Waals/Lewis Acid-Base Approach Emily B. Henry, Lipscomb University
Fabric Modification by Radiation Methods Dr. Vincent Luo, China General Nuclear
Developing Biocompatible & Bioabsorbable UV Materials Enabling Mass Production of Custom Medical Device Implants Using Micro-CLIP Evan Baker and Henry Ware, Northwestern University
|
Hardcoats 10 AM - NOON
Highly Reactive Thin Film Hardcoats for Plastics Marcus Hutchins, Allnex
Investigation of Cure and Nanomechanical Properties of Weatherable UV-Cured Hardcoats Jennifer David, Momentive Performance Materials
UV Curable Hard Coats Mediated with Thiols Qiang Hu
|
Printing & Packaging 1 PM - 3 PM
Recent Advances in Low Viscosity, Low Migration, Fast Curing UV/EB Resin Technology Paul Share, BASF Corporation
A Prescription for Healthy UV Printing Laura Maybaum, NAZDAR and Jim Raymont, EIT, NAZDAR inks and EIT Insttrument Markets
UV LED Curing in Production Printing Environments Jennifer Heathcote, Phoseon Technology
Functional Coatings to Enhance Decorative Packaging Kristy Wagner, Red Spot
|
Coatings 1 PM - 3 PM
Determination of the Surface Energy for UV-Curable Easy Release Coatings Emily B. Henry, Lipscomb University
Surface Energy: An Applied Experimental Design for Novel UV-Curable Coatings Aseel A. Mahmood, Lipscomb University
|
Digital Printing 3 PM - 5 PM
How the Selection of Raw Materials Can Impact Print Speeds in Digital Printing Dev Nagvekar, BASF
Challenges of Replacing Automated Screen Printing of Plastic Parts with UV Curable Singlepass Inkjet Paul Beliveau, Fujifilm Dimatix
Advances in Inkjet Printing Demanding Changes in Chemistry Dene Taylor, SPF-Inc
|
Adhesives 3 PM - 5 PM
Radiation Curable Pressure Sensitive Adhesives Jin Lu, Arkema Inc., Sartomer Business
Goldilocks and the UV Curable PSAs Lisa Castillo, KIWO and Jim Raymont, EIT, KIWO adhesives and EIT Instrument Markets
Formulating a UV-Cure Pressure Sensitive Adhesive for PVC Foam Tapes and Converting an Oven-dry Water-Borne Material Using an LED Lamp Cure System Brooke Shell, Novagard Solutions
Fine Art Applications Using Pigmented UV Adhesives Sidney Hutter, Sidney Hutter Glass & Light Inc.
|
Special Sessions Track C
|
Advanced Technology for UV Wood Applications, 10 AM - NOON
- UV LED for Wood Applications
Mike Higgins, Phoseon
- The Rise of Digital Printing & Inert Coatings for Wood Applications
Roy Pagan, Cefla North America – Finishing Division
|
Panel Discussion the Latest Advancements in 3D Printing using UV Technologies, 2 PM - 3 PM
This panel discussion will feature some of the thought leaders in materials, equipment, and end uses for UV technologies in 3D Printing.
Panelists:
Victor Latour, Supervisor of Digital Design Stoopid Buddy Stoodios
Sumeet Jain, Director - Market Development Arkema Inc., Sartomer Business Unit
Lance Pickens, CEO & Founder MadeSolid
Mike Idacavage, VP Business Development Colorado Photopolymer Solutions
Brian Adzima, Materials Scientist, 3D Printing Autodesk
Alex Mejiritski, President Spectra Group Limited
|
Material Innovation: A Discussion with Consumer Product Companies, 3 PM - 4 PM
A discussion on how companies prioritize, explore, vet and select new materials and technologies, and how UV+EB offers potential solutions.
Panelists:
Sharon Tracy, PhD Steelcase Inc.
Alrick Warner P&G
Christopher Seubert Ford Motor Company
Todd Fayne Pepsi Co.
Robin Wright 3M
|
Special Sessions Track D
|
UV/EB Curing for Automotive Applications, 10 AM - 12 PM
- Future Trends in Automotive Lightweighting
Chris Seubert, Ford Motor Company
- Cationic Curing of Automotive Coatings
Cynthia Templeman, Toyota Motor Engineering & Manufacturing NA
- More Speakers Added Soon!
|
|